The type of push stick I use is hanging on the right side of my saw, was handy there.





I recently put a delta t-2 fence and added an 8" extension on the right, just enough where it's too far away.

So tonight I made a bracket that hangs on the right side of the fence to put it in,seems like it'll work real good. It doesn't interfere with the fence operation and I can just lift it off if not needed.

So has anyone else done this or do you just leave it lay on the table top.

Show some PICS. if you have done this, would be much appreciated. I don't have PICS. of mine yet but will post when I do.

THANK YOU

JEFF