Well, I finally got the SawStop into the basement. But I now have an unexpected problem. I was checking everything out before I assembled the table, fence, etc., and found a noise when I raise or lower the blade mechanism. It sounds like a clicking noise. So I am asking the other SawStop owners if their saw makes a noise when raising or lowering the blade mechanism. I already tried the solution in the manual, that suggests to loosen or tighten the lowering mechanism miter gear nut, but that had no effect- the noise is still there. I am pretty bummed about this, as I am thinking that it is a bearing, unless I start having people respond and tell me that it is a normal noise. But I do not recall any noise on the display model at the retailer, so I do not think this is normal. All help is appreciated. Thanks, Bill