Does anyone have any experience with this product? How well does it work? Does it engrave in black only are does it do shades of Gray as well?
Thanks,
Steve
Does anyone have any experience with this product? How well does it work? Does it engrave in black only are does it do shades of Gray as well?
Thanks,
Steve
Epilog Legend EX24, Corel X3
The tile solution works well. I have been using it for a few years now. It does take some trial and error to get the setting correct but when you do.
The solution only engraves in Black, Bronze, or Blue. Depending on what color you purchase. The black will only engrave black but grays can be made from halftones.
You may want to look into Lasertiles instead of the solution based product. From what I have seen the consistency you will get from the lasertiles will surpass the solutions.
Wil
Epilog EXT36 60w, Corel 12, Adobe CS3, ArtCAM Pro 2010, Techno LC4896
Thanks for the reply Wil. I have used LaserTile with very good success however I was looking into doing something with tiles of a different size than what they offer.
Steve
Epilog Legend EX24, Corel X3
Try it out. We have had spotty results with some tile others were great. Trial and error come in to play for this product.
Wil
Epilog EXT36 60w, Corel 12, Adobe CS3, ArtCAM Pro 2010, Techno LC4896
I hope it works well - I just ordered White (frost), black and bronze. I guess I'll know in a day or two when it arrives...
Keep us posted on you results. I am considering trying the same.
I've used ordinary Cermark on tile, and it works fine..
Why have two types of 'black' cermark.. The stuff is expensive. Up here, a spray can of the stuff cost 125.00 or so..