Results 1 to 15 of 15

Thread: Airshield "Ion-Drive" is complete...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2005
    Location
    Brentwood & Altamont, TN
    Posts
    2,334

    Airshield "Ion-Drive" is complete...

    There have been a few new Airshield post recently so I thought I would post the success of my installing an "ion-drive" to my own. The NiCd battery pack for the Airshield costs around $40 pluss S&H and tax where applicable. I retrofitted 3.7v Li ion batteries from Battery Junction using a compariable plug from Radio Shack and some connector wire and a bit of solder. I also bought a smart charger for the batteries. Easy task and the cost per battery is around $5 each. Two of these batteries powered my Airshield for 16 hours before I got tired of trying to wait for the juice to run out and I just turned it off. So, clearly these out last the OEM packs by many hours (the best I couold get out of the OEMs was 7 hours run time on two). Pictures below...

    Name Code Qty Each Options
    -------------------------------------------------------------------
    Universal Smart Charger TLP-2000 1 $19.95
    for Li-Ion battery Pack
    (3.7V - 14.8V, 1-4 cells)
    (Shipped)
    Lithium-Ion 18650 3.7V 186502200PTC 4 $5.29
    2200 mAh rechargeable
    battery with TAB with PTC
    Subtotal 41.11
    Shipping 8.15
    Tax 0.00
    Total 49.26


    My next job is to retrofit a good replacement for the internal filter...
    Attached Images Attached Images

Similar Threads

  1. Airshield "Ion-Drive" is complete...
    By Chris Barton in forum Turner's Forum
    Replies: 10
    Last Post: 02-11-2007, 5:22 PM
  2. Need some help with decisions.. for a complete novice
    By John Libertate in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 10-15-2006, 9:19 PM
  3. A new use for my Trend Airshield...
    By Ken Fitzgerald in forum Off Topic Forum
    Replies: 1
    Last Post: 09-06-2006, 11:26 PM
  4. Project complete: Grandfather clock
    By David Duke in forum General Woodworking and Power Tools
    Replies: 28
    Last Post: 06-27-2006, 3:40 PM
  5. Trend Airshield ???
    By Bobby McCarley in forum General Woodworking and Power Tools
    Replies: 2
    Last Post: 05-11-2005, 1:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •