Howdy Fellow Creekers,
I haven't posted in awhile. Been busy with many other projects.
I just completed the basic install of a Home Theater in my basement and am now planning to build some cabinetry to surround the screen and house the electronics, hide the wires, etc. I'm planning to build som e traditional face framed cabinets and need some advice on providing venting for the cabinet that will house the electronics. I was thinking of routing vent holes into the cabinet doors and in the top as well. I was also considering putting vent holes into the shelves themselves to aid in air flow from top to bottom, but perhaps that won't be needed if the cabinet door are vented. Do any of you have any experience with this sort of thing.
Thanks
Bart