Here's some pictures of the kitchen I just finished.
My first complete kitchen job, and I'm glad it's done. Started in April.
63 doors/ drawers, about 45 sheets ply, and about 900 bd ft 4/4 oak about 350-400 actual hours
I offered to help a guy that was building his house for 10$ per hour, and he took that to mean that I would build the entire kitchen.
It paid for my 22-44 drum sander, (then they went and dropped the price by half.)
Had to make the molding for 15 deg so it wouldn't overlay the corner units, had to remake 4 doors that ended up 1" too small. I screwed up the drawings on that one.
Used satin waterbased poly, and had some areas turn cloudy. I was wondering if anyone else had found a way around that, for the last 5 doors, I tried gloss up till the last coat, but couldn't tell if it made a difference.
Reply With Quote