After the excellent replies to my Tenon Jig inquiry, I thought I may ask another question regarding mortise cutting. I intend to get a dedicated Mortising Machine someday, if necessary. Right now, I thought I would use another method for accomplishing my Mortises. What would be a good method for mortising, or perhaps there is a good Router Jig one could make for this task? What does everyone think of the Mortise attachments that are made for drill presses? In the past, I have used the router and chisel and had good results, but maybe someone has an idea or 2 to speed thing up and provide better consistancy? I am planning a Computer Workstation and Kitchen Pantry Cabinet project and I am sure there will be no shortage of Mortise/Tenon joinery on this and future projects. (Not to mention the Shaker Style Bed, Head & Foot Board the Mrs. wants me to do in the near future. I guess I have to keep her happy too........after all, she nevers complains when I buy more tools!) Thanks again for the excellent advice and information...........Everyone here has been very helpful, and it is very much appreciated!