Results 1 to 4 of 4

Thread: glass ornaments

  1. #1

    glass ornaments

    Has anyone engraved on any glass christmas bulb ornaments? I am having a problem with them cracking. I have an epilog mini 45 watt.
    I have tried many different settings. Any help would be great.
    Thanks
    Last edited by Lori Molitor; 11-21-2009 at 7:31 AM.

  2. #2
    Lori,

    We've been able to do them with a setting of 45 Speed/ 15 power on a 45W Epilog.
    Attached Images Attached Images
    Last edited by Darryl Hazen; 11-21-2009 at 8:51 AM. Reason: Added photo


  3. #3
    Darryl, are you doing them flat or in the rotary ?

    I'm having good result with the focus about 2mm beside the highest point and using 80% black for fillcolor.

    Andrea
    _______________________________
    LaserPro Spirit 40 W
    OKI ES9431

    Who wants to hear the bells must pull the rope
    Wer die Glocken hören will muss am Seil ziehen

  4. #4
    I am doing them by resting them in a fixture to keep them from moving, focusing on the highest point and then jogging the table up twice so as to compensate for the curvature of the ornament. I have never tried to use the rotary attachment on these.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •