building a coset what should the rought opening be and the finished opening be for highth and width incase i do folding doors or sliders....
air
airless
building a coset what should the rought opening be and the finished opening be for highth and width incase i do folding doors or sliders....
'Can't answer your poll 'cause there is no information about what you want to spray. If it's latex, airless...
Same for the closet. Your rough opening is dependent on the door you choose to install.
--
The most expensive tool is the one you buy "cheaply" and often...
Need details
Bifolds are different than regular entry doors.
Entry doors rough opening is usually 1/2" on the side, 1/2" or so on top.
Last edited by Steve Clardy; 08-21-2006 at 7:08 AM.