Earlier this summer I need some help proportioning a set of drawers I was designing that were to be built in under a set of stairs. The look I wanted was a diminishing drawer height, bottom to top. Luckly someone here was able to help me work it out and so I thought I'd post this pic of the finished project. This surely isn't "fine woodworking" as it is intended for a teen bedroom area and except for the birch ply top and a couple of sticks of off the shelf molding from HD it's made entirely of 1 X pine scrap panneling tore out of the room during renovations elsewhere. The side wall was rough planking so I coverd it with homosote and glued on colorful patches of felt - turned it inot a poster wall where the occupant could pin stuff. Interestingly, after I installed it I calculated the space; there are over 12 cuft of useable drawer volume in this thing. Something any teen can take advantage of.