[OP]
Member
This is the latest turning project just completed.
It a chunk of one of the cherry burls a friend gave me a couple of years ago. The diameter is about 9 inches. The finish is Watco Lacquer sprayed with an HVLP. I filled the crack with epoxy and sanding dust from the turning. The Bottom was left kinda thick because of the soft bark.
Garry
http://www.superwoodworks.com/Projec...ryBurlBowl.htm
Member
That is a beautiful piece. Your efforts and nature made it so!
Bruce
"The great thing about Wood Turning is that all you have to do is remove what's not needed to have something beautiful. Nature does tha Hard work."
M.H. Woodturning, Etc.
Peoria, Illinois 61554
Member
Beautiful wood and the crack certainly does nothing to detract from it. great work.
Contributor
Beautiful piece Garry. I had a cherry one with a crack and I did the same thing. Epoxy and sanding dust. Worked great. That is a great job.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Posting Permissions
Reply With Quote