Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: First Goblet Attempts (Got the Camera Back)

  1. #1
    Join Date
    May 2006
    Location
    Lexington, KY
    Posts
    851

    First Goblet Attempts (Got the Camera Back)

    O, Glory of Glories, O Joy of Joys! The Vortex has me, and now I have some decent photos of it!

    EDIT: GeoCities wasn't happy with the amount of data I was transferring. Pix appear in my reply farther down. Sorry!

    So I decided to try my hand at a goblet. This was my first attempt:

    As you can see, it's short, squat, resembles more a votive holder than a goblet, and I didn't even bother to finish it. It measured about 1.75" wide by 1" tall. The second one was from the same blank, and came out a bit better:

    Again, 1.75 inches wide, but this time about two inches tall. I like the outside shape of the bowl, however I didn't hollow the inside evenly with the outside---if I could do that with this form, I think I'd have a winner for a footed espresso cup. I finished it with Minwax sealer and poly.

    Now for the third one:

    I was really happy with this one. It was from the same bit of branch, but this time on the end near the trunk rather than the end farthest from. It is about 2.25" wide by about 5.5" tall, and the inside of the bowl matches the curve of the outside of the bowl. I must also say that my depth gauge and sidewall thickness calipers were my eyes and fingers respectively, thus the reason I felt it necessary to leave the walls so thick. Again, finished with Minwax sealer and poly.

    So... How'd I do?
    Last edited by Henry C. Gernhardt, III; 06-02-2006 at 4:40 PM.
    That's not a light at the end of the tunnel; It's a naked singularity.

    Henry C. Gernhardt, III

  2. #2
    Join Date
    Mar 2005
    Location
    Anaheim, California
    Posts
    6,909
    Quote Originally Posted by Henry C. Gernhardt, III
    So... How'd I do?
    Turning? I have no idea.

    Taking pictures and attaching them? Not so great.

    (Unless you figured out a way to turn square boxes with 'X's in them...)
    Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
    "Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
    We used to be hunter gatherers. Now we're shopper borrowers.
    The three most important words in the English language: "Front Towards Enemy".
    The world makes a lot more sense when you remember that Butthead was the smart one.
    You can never be too rich, too thin, or have too much ammo.

  3. #3
    Join Date
    Jan 2005
    Location
    University Place, Washington
    Posts
    1,268
    The GeoCities web site you were trying to view has temporarily exceeded its data transfer limit. Please try again later
    Thats what I got.
    Sometimes we see what we expect to see, and not what we are looking at! Scott

  4. #4
    Join Date
    Mar 2005
    Location
    Anaheim, California
    Posts
    6,909
    Ah, there they are...gotta feeling they're going to come and go as people view this thread.

    Oh bugger...they're gone again. Looked ok when I saw them though.
    Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
    "Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
    We used to be hunter gatherers. Now we're shopper borrowers.
    The three most important words in the English language: "Front Towards Enemy".
    The world makes a lot more sense when you remember that Butthead was the smart one.
    You can never be too rich, too thin, or have too much ammo.

  5. #5
    Join Date
    May 2006
    Location
    Lexington, KY
    Posts
    851
    Well, crap... I forgot about the bloody GeoCities limits. Okay. Let's try this again. The three images are the orders of attempt.
    Attached Images Attached Images
    That's not a light at the end of the tunnel; It's a naked singularity.

    Henry C. Gernhardt, III

  6. #6
    Join Date
    Jan 2005
    Location
    University Place, Washington
    Posts
    1,268
    Looks good Henry. What is the wood ? Really nice, and the vortex just gets stronger Your hooked
    Sometimes we see what we expect to see, and not what we are looking at! Scott

  7. #7
    Looks great! I would guess Ambrosia Maple on the wood?

    Corey

  8. #8
    Join Date
    May 2006
    Location
    Lexington, KY
    Posts
    851
    Scott, I really wish I knew what the wood was! It's all from the same tree, however---If I remember correctly from last year, it had single, ovoid leaves, non-serrated, and somewhat small, with small, reddish berry-like fruit which came up later in the year.

    Here's another pic, showing the stem of the goblet and some of the great heartwood figure in there:
    Attached Images Attached Images
    That's not a light at the end of the tunnel; It's a naked singularity.

    Henry C. Gernhardt, III

  9. #9
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    Looking good Henry. Keep'em coming. I think you have been hooked into the vortex.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  10. #10
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,549
    Nice first goblet Henry! Keep 'em coming!
    Ken

    So much to learn, so little time.....

  11. #11
    Join Date
    Aug 2004
    Location
    Dayton, TX
    Posts
    3,173
    Nice Job Henry. Keep it up.

    Ernie

  12. #12
    Join Date
    Feb 2006
    Location
    Buse Township, MN
    Posts
    1,500
    Quote Originally Posted by Henry C. Gernhardt, III
    So... How'd I do?
    I'd say you done good, real good......no, make that you did GREAT! What's next? Hollow form??? Ort holder???? Box????? Bonker???? Confetti Lamp????? Lee DeRaud Triangle Death Star??????

    Keep them coming Henry!
    Officially Retired!!!!!!!! Woo-Hoo!!!

    1,036 miles NW of Keith Burns

  13. #13
    Way to go Henry!! Glad you got your camera back. They look good. The wood colorations worked very well with your spindle work on the goblet stem. Very cool!
    ~john
    "There's nothing wrong with Quiet" ` Jeremiah Johnson

  14. #14
    Join Date
    Dec 2005
    Location
    panama city fl
    Posts
    201
    Great, Henry.........keep them coming....very nice indeed

  15. #15
    SWEET! and I love that wood! What a difference between 1st n' 3rd....you learn quickly. Ya done good!
    Joe
    ------------------------------------------------


    Experience...is simply the name we give our mistakes.

    Oscar Wilde
    .................................................. ..................

Similar Threads

  1. Back to Turning
    By Jim Becker in forum General Woodworking and Power Tools
    Replies: 8
    Last Post: 02-16-2004, 1:52 PM
  2. Back from Alaska!
    By Bruce Page in forum Off Topic Forum
    Replies: 6
    Last Post: 02-13-2004, 2:47 PM
  3. Wood In The Back!
    By Scott Greaves in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 10-16-2003, 9:13 AM
  4. Welcome Back, Everyone!
    By John Miliunas in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 09-21-2003, 7:04 PM
  5. Hi guys, back from the South Seas
    By Mike Schwing in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 07-21-2003, 8:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •