[OP]
Member
I have a friend in Denver who needs to cut 60 - 6-1/8" holes in a piece of 3/4" plywood. The plywood is 48"x 85". Looking for suggestions. This would seem to be an ideal application for a computer operated router. This is a one time deal, so any suggestions will be appreciated.
Is there anyone on this forum with this type equipment in the Denver, CO area?
Thanks, Jim
Administrator
Jim,
I own a 48" by 96" ShopBot CNC router which would do the job in just a few minutes. Although the distance makes it impossible for me to do the job you will surely find a ShopBotter in the Denver area. Finding someone is easy, visit the ShopBot web site and click on the "Let's Talk ShopBot" link to their forum. You can post a message as a guest and ask for assistance, I expect you will have several people respond.
Good Luck!
http://www.shopbottools.com/
Member
If you can't go the shopbot route, you could use a router and a template.
Contributor
Naw, UPS only charges about $8 to ship holes from VA to CO: they're bulky, but very light.Originally Posted by Keith Outten
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Member
Lee, I think the OP’s friend needs the hole thing, and UPS only ships the top part.Naw, UPS only charges about $8 to ship holes from VA to CO: they're bulky, but very light.
Frank
Posting Permissions
Reply With Quote