Results 1 to 9 of 9

Thread: Just so Don Farr doesn't worry about me...

  1. #1
    Mike Schwing Guest

    Smile Just so Don Farr doesn't worry about me...

    I'm off again Don - this time to Maine for a week of fishing and enjoying the Maine Lobster Festival.

    I do plan on stopping by the Center for Furniture Craftsmanship in Rockport while there... so at least there's a bit of woodworking involved...
    http://www.woodschool.org/

  2. #2
    Have fun while I'm slaving over this hot desk.
    Let me know how your bandsaw table turns out. I have been building the same one.
    Wisdom comes with age, but sometimes age comes alone.
    Don

  3. #3
    Mike Schwing Guest
    Will do Don. I'm actually taking my time with it but I've got the entire table built and attached, and I have to say, its very impressive. Rock solid attachment, and finally my skills are getting to the point where things fit like a glove.

    I decided that rather than fish around for all of the oddball hardware I'd buy the kit from Schlabaugh & Sons and I'm very glad I did, every piece of hardware, including the T-track, knobs, angle iron, everything, is right there.
    Last edited by Dennis Peacock; 07-31-2003 at 9:02 PM.

  4. #4

    Uh Mike- Just to lead you into temptation

    One note for you is that to get to Peter Korn's, you have to drive by the Lie-Neilsen factory and showroom on Rte 1. Just keep your eyes peeled to the right (eastor seaside) when you go thru Warren. Bring Money, you won't be able to resist the temptation-- trust me on this one.
    Dave Anderson

    Chester, NH

  5. #5
    Mike Schwing Guest
    Quote Originally Posted by Dave Anderson NH
    One note for you is that to get to Peter Korn's, you have to drive by the Lie-Neilsen factory and showroom on Rte 1. Just keep your eyes peeled to the right (eastor seaside) when you go thru Warren. Bring Money, you won't be able to resist the temptation-- trust me on this one.
    OH CRAP! (thanks)

  6. #6
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,935
    Quote Originally Posted by Mike Schwing
    OH CRAP! (thanks)
    You know you want some, Mike... Like the man said...bring money!

  7. #7
    Mike Schwing Guest
    Quote Originally Posted by Dave Anderson NH
    One note for you is that to get to Peter Korn's, you have to drive by the Lie-Neilsen factory and showroom on Rte 1.
    Oh Dear God I just looked at the website and they're only a few miles away from my favorite Moody's Diner. I bet I've driven past there a dozen times without ever seeing it before. You can bet my eyes will be peeled this time. Holy canoli, a plate of freshly fried scallops and then off to the Lie-Neilson factory. If I could manage to fit in some fishing and a bicycle ride in the same day I could die a happy man.

  8. #8
    Fresh water or salt water fishing Mike? Spent many a summer around Moosehead Lake, the Rangeleys, Lake Sebago. Enjoy the fishing, lobster and bring lots of money to really enjoy the Lie-Neilsen factory
    Dan McLaughlin

  9. #9

    Additional info Mike

    Look on the L-N website for a picture of the building, you wouldn't want to miss it would you? Go on a week day and you can get a tour of the facility. Yes, it is a very short drive from Moody's. And just in case you didn't get the message- Bring Money.
    Last edited by Dave Anderson NH; 07-31-2003 at 4:00 PM.
    Dave Anderson

    Chester, NH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •