Epilog Legend 24TT Display Issue

[Charlie Ellis]

Hello. Has anyone had this happen? First I had one black line, then two, then more, now about half of it is this way. I've pulled the panel and cleaned and checked all of the ribbon cables and connectors. On the back of the display are a bunch of bent metal tabs which look to make contact with ground pads on the display module. I gave each of these a small check with some pliers, no change. Time to order a replacement module from Epilog?

[Bruce Volden]

I had the same problem for maybe 2 years!!!
Machine still ran great - just couldn't see much on the screen!
The biggest problem I had was re-establishing print address when I got a new computer.
While running jobs I had to keep tabs on what job was what on the TT screen - I had to write down what line was what job.

I looked all around for a replacement screen NADA! Problem was solved when I retired!
I have parts available should you need some!

Bruce