Results 1 to 2 of 2

Thread: Corel Draw file not showing in laser output layer window

  1. #1
    Join Date
    Sep 2020
    Location
    New Zealand
    Posts
    13

    Corel Draw file not showing in laser output layer window

    I have a problem where the Corel Draw file is not showing in laser output layer window. I have used the file numerous times, usually just duplicate page then, change the recipients name out for the next recipients, then bitmap and send to laser output to set speed/power settings, then send to laser. It is not showing in the output layer window. None of the other files in that customers file show either, however, I am having no problem with other customers files, they are showing and can be sent to laser output, then to laser without issue. Comes up with save file error, but I have done nothing different as far as I am aware. Any ideas would be welcome. Using Corel Draw 4 and Lasercut 5.3

    I have copied the file and saved as a new file within the same folder. It did not fix the issue.

    I have done a fresh setup of the item in the file I need at the moment, saved to a new Folder and tested and this works just fine. However as there are a number of setups in here that I use for this customer, and as they entail a lot of work to get laser ready for paua inlays etc and detailed logos for lasering I would rather not have to reset them all up again, so any suggestions as to original problem would be welcome.
    Last edited by Julie Ramsay; 07-06-2024 at 12:06 AM. Reason: Update info
    CX1200 Laser 100 Watt
    Maxpro
    Gravograph 400
    Gravograph 200
    TXL
    Sublimation

  2. #2
    Julie

    I am not familiar with your equipment, but with mine, it is usually a setting either in Corel or in my laser software. I have also had instances where reconnecting my usb cable solved the problem. Sorry not to be of more help. Good luck!
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •