Here are the saws I've clean and inspected from the saw purge. Note that these are all used. They are all pretty straight. If I say they are sharp, that just means they will cut wood. They could all benefit from a good sharpening. If I say they need sharpened, that means the works. Jointed, sharpened, set. There still may be a little rust between the teeth. If a handle was broken and I repaired it, I will say so. If it has a crack that I didn't fix, I will mention it. Some of these saws are 100 years old, some are newer. (Ones with rounded handles are older). The plates are pretty straight, but a few may have a minor bend.
If anyone interested please send me a PM with your address and tell me what saw number you want. These saws are free to good homes/shops. First Come - First Served.
Group One L-R
1. Fulton 18" 10PPI X-Cut, Sharp, Handle crack, weak etching
2. Unknown, 19" 9PPI, Needs Sharpened, rebuilt from different saws
3. Lockwood, 21" 8PPI, Rip, Sharp, Handle Repaired
4. Millers-Falls 26", 10PPI, X-cut, Sharp -Claimed
5. Millers Falls 26", 8PPI, X-Cut, Sharp
6. Millers Falls 26", 10PPI, X-Cut, Sharp
Group 1.jpg
Group Two L-R
7. Disston 26", 8PPI, X-Cut, Sharp - Claimed
8. Disston 26", 8PPI, X-Cut, Sharp
9. Adkins 26", 10PPI X-Cut, Sharp
10. Adkins 26", 8PPI, X-Cut, Sharp, Repaired Handle - Claimed
Group 2.jpg
Group Three L-R
11.Lakeside, 26", 6PPI, Rip, Sharp, Handle crack. (Early, before Montgomery Wards) - Claimed
12. Rockwell 26", 8PPI, X-Cut, Sharp
13. Unknown 26", 8PPI, X-Cut, Sharp, Teflon Coated
Group 3.jpg
Reply With Quote