gladiator drawing to file and engrave on stainless

[stan kern]

using an old gladiator dxf file I will show using this file to engrave stainless steel with a 100 watt mopa fiber laser


https://youtu.be/QPXBZXi8A34

[Mike Chance in Iowa]

Thanks for sharing the video. Very neat. I may have missed this in another thread, but what is the maximum size you can engrave on your mopa fiber laser?

[stan kern]

300x300 mm just under 12x12 inches, changing the lens changes the bed size so the 300 mm is max