I have a Delta 36-725 table saw that I have had for approx. 11 years. I know all of the negatives of this saw, especially parts availability. For the life of me I can't figure out why Lowes still carries this saw with no support. This saw has served me well in my shop with little complaints. I did wire it for 220 when I got it. Now I have bought a cabinet saw and no longer need the contractors saw. In order to sell it, I was going to change it back to 110. When I went to flip the switch on the inside of the saw that changes the current from 110 to 220 and visa versa, the switch crumbled and fell apart. As I pulled the switch out, I see 4 wires. Black, white, green, and what appears to be blue. I cannot find a replacement switch on the net, and I assume that since delta parts for this saw are no longer made, I'll need to straight wire these wires together. Anyone know how to on this? Whicjh wires to tie together?
Thanks for the help.