Shaper Workstation Table Jig

[John TenEyck]

Michael, please school me on your workholding clamps and stops? Thanks.

John

[Michael Burnside]

Michael Burnside, would you by chance have the SVG file for the larger Shaper Origin table (6 x 10 array of holes) on hand? This looks to be a great size and I'd like to cut one out for my workstation.

Yea, I'll try to send it off to you tonight when I get home from the office.

Michael, please school me on your workholding clamps and stops? Thanks.

John

No problem John, will reply in detail tonight.

[Ed Mazuronis]

Thanks Michael. Let me know if I should post my email here or if you have a link I could download from. I've best testing the 16mm bit to helix bore the 20mm holes with excellent results.

[Michael Burnside]

Thanks Michael. Let me know if I should post my email here or if you have a link I could download from. I've best testing the 16mm bit to helix bore the 20mm holes with excellent results.

Ah sorry Ed, was a crazy work day. Shoot me a PM and send me your email and I'll provide it that way. I'll try to remember to log in tonight if work isn't crazy again.

[Ed Mazuronis]

Ah sorry Ed, was a crazy work day. Shoot me a PM and send me your email and I'll provide it that way. I'll try to remember to log in tonight if work isn't crazy again.

Totally understand. Had a similar day myself. I don't think I have PM access here, but my Yahoo mail is good if sent to egmiii. Much appreciated!

[Jim Becker]

Totally understand. Had a similar day myself. I don't think I have PM access here, but my Yahoo mail is good if sent to egmiii. Much appreciated!

Ed, simply become a Contributor and you'll have access to the Private Messaging system as well as images and the Classifieds. The minimum ask is only $6 a year. Click on the "Donate" button up above to do that. We do not permit posting of email address as a work around relative to PM access.

Jim
Forum Moderator

[Michael Burnside]

Ed, after you get contributor status, send me your email via PM and I’ll get you a set of CAD files.

[Ed Mazuronis]

I haven’t participated on this site for 5 or so years, so becoming a contributor isn’t really something I’m interested in for the time being. I used the documented table specs for the 4 screws and drew one up quickly. Thanks for the offer though.

Jim, feel free to delete my posts that violated the rules. Certainly didn’t mean to cause any trouble. Thanks

[Michael Burnside]

Ah no problem Ed. I just don't want to display my email nor do I want to display yours. If and when you decide, I've got the files right here for ya, they're not going anywhere.