Hi there! I am new here, so please forgive me if I am putting this in the wrong section. Here is what I am trying to find the answer to...I recently remodeled my kitchen sink area. I bought the base from Lowes and used finished grade plywood for the area around the sink. I applied Tung Oil several times to make the area waterproof (which worked very well) but now I want to apply a heavyweight marble-looking wallpaper. The problem is because it was treated with oil, it will not stick to the wood. I have tried sanding it down but that did not work, I'm assuming because the oil penetrated the wood. I am at a loss here and need to know what, if anything, I can do to the wood to ensure the wallpaper will stick as it should?