Ok, I'm finally kind of getting the hang of the skew. There's a much lighter touch needed than I thought (mostly). I've become semi- comfortable with the 1.25" skew and I'm "starting" to get semi-ok at beads but I'm finding the 3/4" skew better for this. It's that correct? Can anyone share their favorite size skew(s) and any additional tips on this tool would be appreciated. I'm using the Alan Lacer grind on my skews. Oh, one other thing... I'm finding that using the short point to roll a bead works better for me (less catches) than using the part you use in a planing cut but the latter gives a little better surface. Which is correct? Thanks in advance.