Avid does make a 2x2 bench top cnc router, but pretty expensive and most likely not an entry level machine for someone just starting out. I would take Jim's recommendations for the two he mentioned above.
David
avid 2x2.jpgavid 2x2 1.jpg
Avid does make a 2x2 bench top cnc router, but pretty expensive and most likely not an entry level machine for someone just starting out. I would take Jim's recommendations for the two he mentioned above.
David
avid 2x2.jpgavid 2x2 1.jpg
Jim. Do you think there would be someone on the Creek that has something that would work for me. Just a thought.
David is correct...the only place to look for a used machine here would be in the Classifieds with a WTB ad which you have access to as a Contributor. In general, used CNC machines worth their salt sell very quickly, however, and they do hold their value. The benefit of a new machine is warranty and support, so if the cost of pre-owned is closer to new than not, the better choice might be new. I just checked on Camheads (the Camaster user forum site) and there are no used small machines currently listed.
--
The most expensive tool is the one you buy "cheaply" and often...