Results 1 to 10 of 10

Thread: Best string inlay kit?

  1. #1
    Join Date
    Sep 2008
    Location
    N. Idaho
    Posts
    1,621

    Best string inlay kit?

    Hi all,

    I've got a project that I'm hoping to add both straight and curved string inlay into. The topic has been discussed here before, but several of the options for tool sets are no longer available (i.e., the LN tools and the LV adapter for router planes). Actually, so far as I know, the only option is the LV inlay tools...

    Anyone know of other sources or have recommendations? Or have a set they'd like to clear out for a fair price?

    Many thanks,
    Chris
    "You can observe a lot just by watching."
    --Yogi Berra

  2. #2
    you can make some of your own
    https://acanthus.com/2018/12/22/string-inlay-tools/
    https://www.finewoodworking.com/2013...nlay-made-easy
    https://canadianwoodworking.com/tech...anding-part-1/

    You can also find lots of small detail tools and bits from luthier suppliers
    https://www.stewmac.com/luthier-tool...pearl-cutting/

    LV and Veritas seem to be just about the only ones offering a retail version

    The last alternative is going back to using a few cut nails and an actual piece of string.

  3. #3
    Join Date
    Apr 2008
    Location
    Dayton Ohio
    Posts
    910
    Although mostly power tools you might find something here:
    https://www.stewmac.com/search/?q=inlay+tools

  4. #4
    Maybe I'm misunderstanding the OP, but LV still sells the router inlay option. It just shows out of stock; not discontinued.

  5. #5
    Join Date
    Sep 2008
    Location
    N. Idaho
    Posts
    1,621
    Edward, thanks! Those are all great links!

    Eric, thanks-definitely lots of goodies at Stew Mac

    Chris-that might be exactly what I was looking for. Oddly it didn't turn up on the LV site when doing my searches so I assumed it was discontinued. Looking again, it does show up on page 4 when searching 'inlay' on the site.

    Best,
    Chris
    Last edited by Christopher Charles; 05-25-2023 at 11:45 PM.
    "You can observe a lot just by watching."
    --Yogi Berra

  6. #6
    Join Date
    Apr 2008
    Location
    Dayton Ohio
    Posts
    910
    Depending on the size of the string you might consider a beading plane, like a Stanley 66. You can also find different makes or make your own. A new set of cutters for the 66 style planes is available from https://www.stjamesbaytoolco.com/
    Lie-Nielsen offers one (out of stock) https://www.lie-nielsen.com/products...ools&node=4076
    Lee Valley https://www.leevalley.com/en-us/shop...l?item=05P0401
    https://www.leevalley.com/en-us/shop...s?item=05P0410 Master set of cutters $30

    Maybe even a quirk cutter like: https://www.ebay.com/itm/29571177018...Bk9SR9DYpYiLYg

    Look for one with different cutters and fences. The model with blade adjuster is also nice.

  7. #7
    Join Date
    Feb 2011
    Location
    Carlsbad, CA
    Posts
    2,227
    Blog Entries
    2
    Chris, I use the LV inlay tools and like them fine- they have different width blades, matching width mini chisels and curved hand tool for clearing waste that are particularly helpful. Fixed fence for reference off straight edges and compass point pivot for curves.

    I have the router inlay attachments but have never really used them- plastic shims for setting width of line groove is effective but too much math for me. For me the dremel (stew Mac) platform produces the fastest and cleanest grooves for straight lines , but I have more trouble getting the pivot point in the correct spot for arcs- bulky and heavier than hand tool.

  8. #8
    I have the complete Lie-Nielsen No. 66 set, if you are interested.

  9. #9
    I have the LN No. 66 kit and the the entire set of Steve Latta inlay tools that LN used to offer, if you are interested. Is there a PM available on this form?

  10. #10
    Join Date
    Jun 2015
    Location
    Northern California
    Posts
    664
    Quote Originally Posted by Mike Brady View Post
    I have the LN No. 66 kit and the the entire set of Steve Latta inlay tools that LN used to offer, if you are interested. Is there a PM available on this form?
    I’m interested in the Steve Latta set. Will send PM to discuss price.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •