-
I'd use a Cedar 4x4 planted in the ground in concrete and lagged into the masonry steps somehow, with two Cedar 2x4s routed into the 4x4, and a shallow dado on the 2x4s (like 1x1) to accept the stiles and fill in the spaces with a 1x1 spacer.
Regards,
Tom
-
This probably doesn't directly apply, but I've used SS commercial grab bars for short exterior hand rails several times with good success.
Not totally aesthetic, but very practical.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules