Hey gang. I resaw a lot, and it's really getting tiring pushing those boards thru the saw.
So, now I'm lookin at this:
https://www.grizzly.com/products/gri...-bandsaw/g0503
Anyone up here have any experience with this saw? It's the Grizzly g0503
One thing that stumps me is that Grizzly also sells a 16" version of this saw, and they say it'll cut 1/16" veneers.
Both the 12" and 16" version have specs that state the closest the blade can get to the conveyer is 1/4". So, how is it achieving 1/16" stock, since slicing is generally performed from the bottom?
Just for general knowledge, I'm currently slicing using Grizzly and a MiniMax 24" saws....and I'm primarily slicing 1/8", 1/4", and 1/2" thins.