Hello once again everyone I now have photos of the third project out of five I am currently working on. This one is similar to one of my raised platform bowls with the carved rims. The big difference on this one is I'll be carving the bowl section as well, so it will be more like an open air basket. The photos show the angled segmented rim (Pommele Sapele) that is glued to the bowl section (Red Elm) and the platform base (Sapele). The whole project will now go back on the lathe for the 4th tine but this time as one piece. I'll be undercutting the rim and bring the bowl section to about 1/4" thick. Then the layout & drawing can start.