Took a break from the candle holders to turn a few bowls, something I don't normally do, I am not a bowl turner. I think there is just too much emphasis on perfect shape, form, wall too thin, wall too thick, foot, no foot, lift, no lift. I much rather spend my time putting a piece of wood on the lathe, turn it round, hollow it out and it become just a bowl, nothing more, nothing less. So, with that being said, these are exactly that, just some bowls. The spalted Oak are 5 to 5 1/4" in dia. and 2 to 2/12" in height. The Walnut bowls are about the same and the larger bowl is 9 x 3". That wood was labeled Elm, but I had a couple of small pieces that looks the same that was labeled Box Elder, so not sure which it is, but I like the red flame in it. The finish is just friction finish using some of Ron's sanding paste.
Bobby
Louisiana
Elm Bowl .jpgElm Bowl 2.jpgElm Bowl 3.jpgSpalted Oak bowls 2.jpgSpalted Oak bowls.jpgWalnut Bowl 2.jpgWalnut Bowl.jpg