I plan to build a 7ft to 7-1/2 ft x 30" sewing table for my wife. I plan to put a set of drawers on one end so she can store her thread etc... Other end would be two legs. Was planning on sitting the top on the drawer stack on the left end and two legs on the right end. Drawer will be @ 30" up to 36" wide and was planning on the two legs to be 4 x 4 to give them some heft. I was planning to use a skirt to give the top some rigidity and start the drawers below the skirt so it would not interfere in their use.
I normally build drawers bases 24" deep, but with the top being 30" deep, not sure how I want to manage the difference. I don't think it is a good idea to sit the base back 3" in front so it is evenly spaced front to back. Thought having it be 24" and sitting up front would look odd, only practical choice is to build it @30" deep and just don't use all the depth?
Welcome your suggestions. Thanks Brian