Prognosis is that the single phase motor on my saw is dead so I知 replacing it with a 3ph motor. The replacement 1ph metric motors are fairly expensive in this size range.
Motor I found is 240v 3ph 4kw. Draws 13amps.
I知 looking at a hitachi inverter since I have installed a couple of them so far.
The inverter I知 looking at is WJ200-037LF
https://www.hitachi-iesa.com/sites/d...0)SM-E265W.pdf
My math suggests I need an inverter capable of 22.5amps on single phase input.
Thank you!