Starting up...thought I work on the doors, first...that way, I can size the ends and the sides better...
Box #3 Start, door parts .JPG
These 4 boards will be the 2 doors...once they get glued up...getting them there will be the fun part..
Box #3 Start, 2 ends .JPG
These 2 will be the ends...( one was scrapped, too wavy and thin)and this one..
Box #3 Start, pieces left .JPG
Will get ripped right down the middle, to give me a pair of sides...
At least that is the plan.
Jointed a couple edges, first..
Box #3 Start, jointer, door 1 .JPG
Wanted a straight edge, before I cross cut for length..then fine tune the glue joint..and glue up Door #1
Box #3 Start, glue up #1 .JPG
Repeat, and glue up #2.
Box #3 Start, Glue up #2.JPG
Then stash them both out of the way...
Box #3 Start, 2 doors glued up .JPG
While I work on the other parts....and wait on the washer to get done..
Box #3 Start, Laundry Detail .JPG
As I have Laundry Detail, today.....
Stay tuned...