Hey all, I'm finishing up a chair project (Morris Chair from the Wood Whisperer Guild).
When the presenter finished the project, he used Waterlox first and then sprayed it with Sher-Wood lacquer. I have generally used water-based finishes when I spray. So my question is...is all lacquer mostly the same, or does the quality differ widely? Would you go through the effort to get Mohawk or some other high end project which isn't readily available, or can you use stuff like Watco from the big box store? I'll spray with HVLP, and strain all the lacquer, no mater what it is. I'm more concerned about the final product than the cost, so I'm not against going to a specialty store or whatever to get a better product if its warranted, just don't want to waste time or effort if unnecessary.
Looking for whatever input y'all might have!