Hoping someone living near SoCal has an interest in turning.
For Sale, Local Pickup: Delta 46-460 Variable Speed 12" Lathe with bed extension and tools / accessories. - $800.
Retail for lathe and extension alone is about $1,260. 8 Drawer Base is Shop Made.
You will need to bring help to load as I cannot assist due to health issues.
This lathe was originally lightly used by my father for several years. He was in his 90s and so did not do a whole lot with it. It is available to pick up in the Riverside area of southern California. The machine is very smooth and surprisingly powerful for its size. There are two rests, a mounting plate, centers, drill chuck, and other odds and ends that will be included.
. .
There will also be included a set of medium quality, mostly HSS turning tools.
Specs:
Horsepower: 1-HP, 1-Phase, 120V, 60-Hz
Speeds: 250-700, 600-1,800 and 1,350-4,000-RPM
Swing Over Base: 9-9/16"
Drive Spindle: 1"-8 RH TPI Thread
Head and Tailstock Taper: #2 MT
Tailstock Spindle Travel: 2-1/4"
Length: 61-1/2" with Extension
Height: 17-3/4"
Motor Control: Electronic Variable Speed
Swing Over Bed: 12-1/2"
Index positions: 24
Distance between Centers with Extension: 42"
Drive Spindle through Hole: 15/32" Self-ejecting
Tool Rest: 6" and 10"
Width: 11"
I suggest replying via PM if you have questions or are otherwise interested.