Hi guys,
I have Felder F900Z spindle moulder along with the FelderCurve Moulding Guard. My current project is to make curved windows and a big 4 sash balcony door.
The shape of the frame, which is 2.7meters wide, is shown in .pdf attachment below. My question is:
What is the best way to setup spindle moulder machine to machine such a long piece using a template?
I am thinking of making the template from 12mm MDF but I am not sure how to fix the 68mm piece of long wood on the template properly. FYI, the guide ring is put on the top of the shaping tool.
Also, what about using the power feeder to hold it down and push it against the tool?

Spindle Moulder Template-Wood Assembly.jpgCurved Balcony Frame.jpg

Thanks in advance.