I ran a series of outlets down center of the ceiling of my shop while wiring it as I finished the interior over a decade ago. Two of them are currently in use by my two air cleaners. Ironically, yesterday I purchased a 14-gauge extension cord so I could power my table saw from one of those outlets. I have an extra 16-gauge extension cord that my disk sander/oscillating spindle sander and my scroll saw will share via another ceiling outlet. All the cords will be mounted with cord restraints.
I am tired of having to plug and unplug cords to move my jointer and router table to use a common 4" dust collection inlet. I am also getting older. Stumbling and tripping has become an issue.
Ken
So much to learn, so little time.....