Hey everybody, I’m a newish member/contributor and this will be my first post. I’m currently building a workbench from some longleaf and loblolly pines i milled from my property. I would say about 90% has been built using hand tools with the remainder being the few times I used my skill saw and bandsaw and the one time I used my uncles old electric handplane for about 30 seconds and made a huge dive in the top. Half of the top is a 13 ish” wide slab and the the other is laminated with some 2x and 3x boards. The leg vise is from Lake Erie and the chop is some white oak that my buddy milled. It’s drawbored with 5/8 red oak pegs that I made from some firewood. Still have a little ways to go before it’s finished and I’ll post pictures as I get it done. Thanks. Please excuse my disaster in my shop