Hi,
I finally got around to swapping out the RD6442S for the 6445 as a treat.
I had to manually enter the vendor settings and user settings, as out LAN card on the PC is dying, and makes spasmodic connection only.
But when lasering something, the file is the right way up on the PC, and it lasers the right way up on the bed, but is shown upside down on the console display. That's disconcerting!
I can't find where or how to rotate the display image at the 6445 console.
Menu>Controller settings>screen origin only offers me 4 choices- top left, top right, front left & front right, and clicking any simply moves where the lasered file is shown on the console, to one of those corners in the console display. It doesn’t rotate it back to the right way round.
I nearly always keep the work origin lower left.
What I need is a ‘flip or rotate display preview’ kind of button, I’m thinking.
I'd welcome any suggestions on fixing this, thanks!