Results 1 to 2 of 2

Thread: RD 6445 S upgrade - console display shows image upside down but lasers it correctly

  1. #1

    RD 6445 S upgrade - console display shows image upside down but lasers it correctly

    Hi,
    I finally got around to swapping out the RD6442S for the 6445 as a treat.
    I had to manually enter the vendor settings and user settings, as out LAN card on the PC is dying, and makes spasmodic connection only.

    But when lasering something, the file is the right way up on the PC, and it lasers the right way up on the bed, but is shown upside down on the console display. That's disconcerting!
    I can't find where or how to rotate the display image at the 6445 console.

    Menu>Controller settings>screen origin only offers me 4 choices- top left, top right, front left & front right, and clicking any simply moves where the lasered file is shown on the console, to one of those corners in the console display. It doesn’t rotate it back to the right way round.

    I nearly always keep the work origin lower left.
    What I need is a ‘flip or rotate display preview’ kind of button, I’m thinking.

    I'd welcome any suggestions on fixing this, thanks!
    Best wishes,
    Ian



    ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
    Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
    Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
    HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
    Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
    Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
    Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.

  2. #2
    Never mind, I've solved it. By choosing top right, as the screen origin, it displays correctly now.
    (Previously I'd tried the other 3 locations, for no difference.)
    Best wishes,
    Ian



    ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
    Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
    Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
    HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
    Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
    Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
    Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •