Just finished this router cabinet/table. Nothing new really. I used some leftover 3/4" plywood from the shop floor for the cabinet and painted with leftover paint from the shop walls. Made drawer fronts from leftover African Mahogany for the living room trim project.

Router Cabinet Front.jpg

Router Cabinet Back.jpg

I pondered how to deal with intake air and flow adjustment. This is what I came up with. The door is friction fit against the plexiglass with a foam pad and will stay in any position it is placed.

Router Cabinet Door Closed.jpgRouter Cabinet Door Open.jpg

The link below is from when I started on the project. Chris Parks posted some good information re: spindles and clearing waste from face cuts. I am still thinking about that and may make some modifications in the future.

https://sawmillcreek.org/showthread....ble-Intake-Air