I知 selling my bandsaw because I never use it, so I値l need a hand saw for the rare times I need to resaw into thinner boards. What would you folks recommend?
Jason
I知 selling my bandsaw because I never use it, so I値l need a hand saw for the rare times I need to resaw into thinner boards. What would you folks recommend?
Jason
- Jason White
YouTube.com/UncleJasonsWorkshop
If you are looking to rip 4/4 or 8/4 stock, pretty much any old 5 tpi ripsaw will do. I have a D-8 with the thumbhole, but rarely use it because an old no-name I refiled as a rip works so well.
I gather some people like frame saws for thicker stuff, but I have not tried it myself.
Do not sell your bandsaw Jason. I am a predominantly hand tool guy and I would never part with my bandsaw. For 99% of us, resawing by hand is miserable. There are a few who knock out a nice resawn board by hand once every month or two. The only maker I know of a quality resaw frame saw is backed up a long long time.
Another vote to keep the bandsaw, unless you are facing some sort of financial hardship. If you ever want/need another one you’ll pay many times more than yours cost. I got one two years ago and the price has gone up 50%. It allows me the flexibility of curved cuts and resawing. Truth be told, resawing is what it’s used for most of the time. I use it for ripping too. The table saw is mostly idle now.
Sharp solves all manner of problems.
Why would you want to resaw by hand when you already have a bandsaw?
Within a week of selling it, you will need it again. Unless you sell it to a friend who will let you 'borrow' it, keep it!
robo hippy
I resaw by hand because I do not have a bandsaw capable of doing it for me. If I had a one, I would use it. I would still resaw by hand often, but sometimes you just want it done without any hassle. Especially when it comes to home improvement projects where you really don’t care about fine art!
If you wanted to resaw by hand, the Blackburn tools roubo saw kit is what to get. Get the BIG one – don’t mess with the smaller versions unless you are under 5’10”. That said, many have complained about being ignored by him. But compared to a 5tpi rip saw, it’s no contest – at least 10x faster, 10x easier, and cuts really straight.
Another vote to keep the bandsaw.
This one would do some of what I use the medium size band saw for.
Screen Shot 2022-12-19 at 8.28.24 AM.png
Pit Saw - 7ft long - 7FT-PITSAW
When I was without a bandsaw I would re-saw by making two deep cuts with the table saw and finish by connecting the cuts with an 8 TPI Disston handsaw.
Last edited by Maurice Mcmurry; 12-19-2022 at 10:19 AM. Reason: link
Okay, okay!!!! You've all convinced me to keep the bandsaw!
- Jason White
YouTube.com/UncleJasonsWorkshop
Mine will sit idle for months at a time, then some project will come along and I will use all three of them every day and be thinking about getting a fourth. One that gets a surprising amount of use is the little antique with a 1/4 inch, 24 TPI blade. The many varieties of blades available is one of the big attractions for me.
Something else that makes resawing easier....either a kerf plane...or, like I do...use the tablesaw to mill a kerf for the D8 to follow. They do make a kerf cutter plane, too.....that the Frame saws use....
A Planer? I'm the Planer, and this is what I use
Jason, that's a relief. My bandsaw is the very last power tool I'd let go...
"You can observe a lot just by watching."
--Yogi Berra
Thanks, it saves me the time of getting in line to express my thoughts that you keep it.
Even my wimpy 10" bandsaw with the plastic frame was better than no bandsaw. Now my 14" bandsaw takes care of the tough jobs.
In Re-Saw Cut.jpg
That would be a bear by hand.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
I make do with the bandsaw, but a Roubo-style frame (https://www.renaissancewoodworker.co...saw-frame-saw/)
saw paired with a Kerfing plane (Search Tom Fidgen Kerfing Plane on You Tube) are on my bucket list.
Last edited by Joe A Faulkner; 12-19-2022 at 10:38 PM.