Results 1 to 2 of 2

Thread: SainSmart laser problems

  1. #1

    SainSmart laser problems

    I have a woodworking project where I want to do some laser engraving. I have a SainSmart laser engraver that attaches to an Ender-3 3D printer. I have not had good luck with it but wanted to give it another try. It worked long enough for me to get it set up but when I went to do the actual engraving I had no laser. The engraver plugs into a 24V fan port on the printer. This port controls the fan by PWM. On the cable to the laser there is a small board. On my laser it looks like a custom MP1584EN buck converter. When examining this board it appears one of the IC chips may have let out a little magic smoke. I only get 0.22V out of the board. If I look at a current picture of the laser for sale on the SainSmart website it has a very obvious LM2596 buck converter, I can find the exact same one on Amazon. I have ordered the same buck converter as on the newer ones and it will be ease to install when it arrives. What baffles me is you cannot control the laser power by PWM with the buck converter inline. I also find conflicting information if this is a 24V/12V laser of just a 12V laser. Unfortunately there is no electrical information on the laser so I can only go by sketchy documentation in website postings. If it can work on 24V why can't I just remove the buck converter? Does anyone have experience with these 1.6W SainSmart lasers?

  2. #2
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,067
    Did the install instructions tell you to hook up to the fan circuit and did it take note of it being a PWM source? I think most of those diodes have a 12 vdc power supply, at least the one I did anyway. Went to that website and they show 5.5 Watt modules with a 12 vdc power input and it mentions PWM.


    If you go to Amazon they have brand new diode lasers complete and much bigger than your 3D printer. I almost purchased one for $559 10 watt with a rotary attachment and they seem to work. Now back to regular price!!! https://www.amazon.com/dp/B09PD7M3TH...xpY2s9dHJ1ZQ==
    Last edited by Bill George; 11-30-2022 at 12:32 PM.
    Retired Guy- Central Iowa. , Cloudray Galvo Fiber , WorkBee 1000x750 CNC Router - Mach4 - Windows 10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •