Hi,

My Epilog Mini 18 (35w) is like 16 years old. It was powered off for last 3 or 4 years. Last week I powered it on and it started cutting after cca 5 sec. I did few test cuts on 4mm B/BB poplar plywood and it was still capable to cut it with 18 speed 85% power and 500f. I completely forgot what was it's normal power and cutting speed for 4mm ply. I am thinking about tube regeneration/replacement, but I do not know if 18s/85p/500f is somehow still acceptable or not.







Best
Mare