Good afternoon guys, its been while since my last visit. My retirement home project which is a DIY project is fixing to kickoff. Building walls, installing lot of blocking that needs to fit. And out of different size 2x material to base board trim. Then there is the finish work, such as doors, windows and lots of trim, plus cabinet work. So I am thinking about purchasing a miter saw stand that I will need to load up for weekends and take back down at end of each day. I want it to be stable and to be able to cut maybe 10'-16' lumber and make repeatable cuts. So I will also need to be able to install a stop block or something. Anyway I was open for suggestions on what to look at that portable and strong that can handle be transported in back of truck. If you have something that fit your needs maybe pass that info along. I do have a 12" Dewalt compound miter saw if that makes difference. Thanks guys for guidance