Frame & Panel Box, with a tray

[steven c newman]

Rest of the resaw parts got used up...
August Project Post, front corner.JPG
Panels are flat...sit in grooves...
Top has a live edge on 3 sides
August Project Post, lid opened.JPG
And
August Project Post, hinges.JPG
And a tray..
August Project Post, tray details.JPG
To hold all the tools and hardware to make more boxes with...
August Project Post, room for another.JPG
1/4" plywood bottom for the box sits on 1/4" x 3/8" wide "slips".
Sat. Morn, too high.JPG
While the tray sits on 3/8" x 3" dowels, glued into each corner..
Tues. Tray Work, glued in place.JPG
Finish is one coat of Witch's Brew Stain...then one coat of clear "warm" gloss poly.

Just a box...

[Stan Calow]

Looks good. Nice color. What are the dimensions? It looks like a good shape and size for home use.

[steven c newman]

I have Laundry Detail, today...so I might be in the shop, long enough to get some measurements....it is now sitting in it's new home, in the shop..
New Home.JPG

Thanks for looking in!

[steven c newman]

Stands 8-1/2" tall, counting the lid....side to side counting the lid is 11-1/2" wide....front to back is 8-3/4" counting the 1/2" overhang of the lid.