Hi folks,
Wanted to get some guidance here. I originally had an electrician wire up my minimax FS41C and now that I have moved the jointer planer I have different power setup. I'm also questioning what the electrician did since he used a 3 prong angled plug with a hot on L2 and the other on Neural and used the white wire for ground. From what I see, misplaced leads on the block with 2 hots and a ground. No true neutral. Would adding a neutral to this infact anything? What I'm thinking is sliding over the Hots to L1 and L2, adding a neutral and using ground, hopefully pulling that cut neutral lead from the machine forward to use it and getting the actual ground from the cord too. The manufacturers documentation is a bit confusing so I'd love some confirmation from someone that maybe had one of these or understands it better than me.