Originally Posted by
Nick Marchesani
Still nothing. I did notice that when the Laser is running or should be firing that if I turn off the power button ezcad2 gives an error message but if I turn off the red button that fires the Laser ezcad2 keeps running. I have to click the stop button.
I still think that it may be the base power supply, not the source. At least from my experience, when my source died, JPT 50w, it would NOT highlight and it would give me an overtemp error.
YMMV, depending on what might have died inside the source. If you have no warranty, I still would drop an extra $100 on a replacement power supply, look at cloudray on amazon or ebay and try to match what you have. Way better if $100 than several thousand....
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others