Originally Posted by
Nick Marchesani
The thing thst makes me wonder if the software changed a setting that stops the laser from firing is that the agree/disagree dialog box never opened, the program always opened without me having to agree. That agree/disagree dialog box only opened a few times and thats when the laser stopped firing. After the laser stopped firing the agree/disagree dialog box stopped opening and the program opened as it always did in the past. I did try deleting ezcad2 and reinstalled it from the stick that came with the laser but that didn't work.
Just a suggestion, you might grab a copy of the new LightBurn that supports EZCad2 boards and see if that will work. They use their own driver, and do not depend on EZCad software at all. Might help narrow down if it's a software issue or a hardware issue. LightBurn offers a free 100% functional 30 day trial. https://lightburnsoftware.com/pages/...before-you-buy
Epilog Fusion Pro 48 - 120 Watt
OMG Laser 60W JPT MOPA Fiber
Mimaki UJF-6042MkII e UV Printer