Hello, I am running into issues with output on my current 10g compressor 3.5CFM/120PSI with desiccant dryer. I am switching to an 80g 5HP pressure lubricated compressor with a corresponding refrigerant dryer of at least 15sCFM/175PSI. I have narrowed down to two choices (as listed in title). Saylor-Beall has a solid reputation however they are running up to 7 months behind on units. Atlas Copco now offers smaller units that are comparable, in specifications, to the 705 series from SB but has a self-described "new design". I really can't find much more information on anyone using or reviewing these Atlas units. I'm wondering if anyone has experience with this new Atlas design (CR5-TS series) and can provide feedback. Thanks!