Busy Saturday morning...Slips #3 and #4 have been trimmed and glued in place..
Sat. Morn, slips glued up.JPG
A 1/4" thick sheet of plywood was placed under the box..
Sat. Morn, needs laid out.JPG
A pencil traced around on the inside of the box..
Sat. Morn, cut lines.JPG
Lines were cut..
Sat. Morn, bottom trimmed.JPG
Test fitted..with a plane...
Sat. Morn, test fit.JPG
To get rid of the wavy edges..can't install it , yet.....it will rest on a bed of glue on the slips....have to wait until the clamps are off...
Next? Stay tuned..