Results 1 to 3 of 3

Thread: Finding center of board

  1. #1
    Join Date
    Jun 2022
    Tracy, CA

    Finding center of board

    This is not really a workshop tool, but... this video just came up for me.

    so simple and I have had to do this a lot in the past.

  2. #2
    Join Date
    Feb 2003
    McKean, PA
    My grandfather who was a carpenter taught me that trick. It is a lot faster than doing the math.
    Lee Schierer
    Captain USN(Ret)

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  3. #3
    Join Date
    Feb 2009
    Cedar Park, TX - Boulder Creek, CA
    I make a quick division in my head, and make a mark from both edges. Cut between them.

    But if you're making multiple divisions, like rows of holes, the angled tape, or rule, is king.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts